clairex technologies, inc. 1301 east plano parkway plano, texas 75074-8524 phone: 972-265-4900 fax: 972-265-4949 www.clairex. com cle135, CLE130E, cle130w 940nm high efficiency gaas/algaas ireds clairex ? technologies, inc. jul y , 2005 clairex reserves the right to make changes at any time to improve design and to provide the best possible product. ? 0.147 (3.73) 0.137 (3.48) 0.205 (5.21) 0.215 (5.46) 0.100 (2.54) dia. 0.025 (0.64) max. 1.00 (25.4) min. 0.190 (4.83) 0.176 (4.47) 0.165 (4.19) 0.145 (3.68) 0.019 (0.48) 0.016 (0.41) 0.156 (3.96) 0.136 (3.45) cathode anode 0.050 (1.27) nom 1.00 (25.4) min. 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) anode cathode 0.010 (0.25) nom 0.213 (5.41) 0.207 (5.26) 0.100 (2.54) pin circle 0.130 (3.30) max 0.050 (1.27) max 0.169 (4.29) 0.163 (4.14) c5 0.147 (3.73) 0.137 (3.48) 0.205 (5.21) 0.215 (5.46) 0.100 (2.54) dia. 0.025 (0.64) max. 1.00 (25.4) min. 0.190 (4.83) 0.176 (4.47) 0.165 (4.19) 0.145 (3.68) 0.019 (0.48) 0.016 (0.41) 0.156 (3.96) 0.136 (3.45) 0.010 (0.25) max cathode anode all dimensions are in inches (millimeters) cle135 CLE130E cle130w revised 4/15/06 upgraded series
clairex technologies, inc. 1301 east plano parkway plano, texas 75074-8524 phone: 972-265-4900 fax: 972-265-4949 www.clairex. com cle135, CLE130E, cle130w 940nm high efficiency gaas/algaas ireds clairex ? technologies, inc. ? clairex reserves the right to make changes at any time to improve design and to provide the best possible product. features ? higher power output ? cathode connected to case ? to-46 header with three lens options ? different package styles provide flexible design options description the original clairex cle130 series has been upgraded. the new series features current state of the art gaas/algaas technology for increased quantum efficiency. the chip substrate is n type material resulting in the case being common to the cathode. the original configuration can still be supplied as a special order. three different lens options are offered. contact clairex for other electrical and package options. absolute maximum ratings (t a = 25c unless otherwise stated) storage temperature cle135 and cl e130w ............................................................. -65 c to +150c CLE130E ................................................................................... -40 c to +125c operating temperature cle135 and cle1 30w ............................................................. - 65c to +125c cl e130e ................................................................................... -40 c to +100c lead soldering temperature (1) ......................................................................... 260c continuous forward current (2) ....................................................................... 100ma peak forward current (1.0ms pulse width, 10% duty cy cle)................................. 1a reverse voltage ................................................................................................... 5v continuous power dissipation (3) ................................................................... 200mw notes: 1. 0.06? (1.5mm) from the header for 5 seconds maximum. 2. derate linearly 0.80ma/c fr om 25c free air temperature to t a = +125c. 3. derate linearly 1.60mw/c fr om 25c free air temperature to t a = +125c. electrical characteristics (t a = 25c unless otherwise noted) symbol parameter min typ max units test conditions cle130 series v f forward voltage - 1.5 1.8 v i f = 100ma i r reverse current - - 10 a v r = 3v p peak wavelength - 940 - nm i f = 100ma bw spectral bandwidth - 50 - nm i f = 20ma t r, t f output rise and fall time - 700 - ns i f = 100ma CLE130E p o total output power - 12.5 - mw i f = 100ma p o total output power 2.0 2.5 - mw i f = 20ma hp emission angle at half power points - 80 - deg. i f = 20ma cle130w p o total output power - 10 - mw i f = 100ma p o total output power 1.5 2.0 - mw i f = 20ma hp emission angle at half power points - 70 - deg. i f = 20ma cle135 p o total output power - 10 - mw i f = 100ma e e irradiance (4) - 2.0 - mw/cm 2 i f = 100ma e e irradiance (4) 0.4 0.5 - mw/cm 2 i f = 20ma hp emission angle at half power points - 22 - deg. i f = 20ma note: 4. e e is a measure of irradiance (power/unit area) within a 0.444" (1.128cm) diameter area, centered on the mechanical axis of the device and spaced 2.54" (6.45cm) from the lens side of the tab. this is geometrically equivalent to a 10 cone.
|
